Ford TorqShift 6, Rebuilt 6R140 6.7L Scorpion 2011-2017 Signature Series Transmission

Ford TorqShift 6, Rebuilt 6R140 6.7L Scorpion 2011-2017 Signature Series Transmission Revmax is proud to announce the availability of Ford 6R140 complete transmissions. These transmissions are upgraded with increased clutch capacity, improved clutch plate material, phosphate steels and ZeroFlex technology. Our transmission is unique to Revmax and cannot be purchased at any of the other copycat builders. The 6R140 is the most robust stock transmission ever put into a passenger truck. However due to cost restraints, Ford elected to use a cheap molded piston to apply and balance the overdrive clutches. The OE piston design only applies a miniscule surface area onto the steel plate. Over time and with hear cycling, this causes the steel and clutch plates to adapt a “cone” memory. This coning causes two further issues. First, clutch pack clearance is reduced which causes drag. This drag then causes the pack to fail as it is being partially applied even when it should not be. Secondly, the coning does not allow the full contact face of the clutch to apply and this causes reduced torque capacity and again rapid failure. Revmax’s patent pending ZeroFlex technology completely solves the coning and inadequate apply issues by the use of our billet apply piston, balance piston and custom spring assembly. Our apply piston allows the overdrive clutch to apply to 100% of the clutch face surface area. Utilizing this billet piston along with our proprietary billet intermediate shaft, we can also increase clutch capacity past that of ANY of our competition without using thinner steel plates or frictions. We can build this unit with up to 11 frictions in the OD clutch, a whopping 44% increase in clutch surface area. By doing this, you now have increased torque capacity and coning is no longer an issue. This transmission has no equal on the market. It is rated at up to 1000HP. Revmax was the first to engineer and design the high performance clutch material used in all 6R140 performance transmissions. These clutches are designed by Revmax and manufactured by Alto and Raybestos. Included in this package is the Revmax Stage 5, Quad Disc Billet Torque Converter. This converter has been tested to over 1000HP and has performed flawlessly. It delivers crisp lockup clutch apply and unlike some of our competition still retains the needed damper to cushion lockup apply and reduce strain on the input shaft. Upgraded Internal Components RevMax Stage 5 Billet 4 Clutch Torque converter 9, 10 or 11 Revmax G3 Clutches and Phosphate Steels in Overdrive Clutch w\ Revmax Patent Pending ZeroFlex technology billet apply and balance piston assembly(factory has 7 and 7). 10 or 11 clutch builds require upgrading to a billet intermediate shaft(please see below to add option to cart). 6 Revmax G3 Clutches and 6 Phosphate Steels in Intermediate Clutch (factory has 5 and 5) 6 Revmax G3 Clutches and 6 Phosphate Steels in Direct Clutch (factory has 5 and 5) High Energy Forward Clutches High Enery Low Reverse Clutches Revmax Exclusive Custom Valve Body with 50% more line pressure. Increases holding power and improves shift quality Revmax High Performance Insignia Control Pump

• Shipping: 
• Return Policy: All core, general and warranty returns must be approved prior to the shipment of the returning product. Please provide your order #. This will help us to process your return quickly. You will receive ALL return instructions via email within 1 - 2 business days. Core Returns: What is a Core? We want to ensure that you are refunded your core charge as soon as possible, but in order to do this, we need your help to follow these guidelines. • We require that all cores be returned within 21 days from delivery date of product requiring core charge. Failure to do so can result in forfeiture of the entire core charge return • All cores must be returned to original warehouse that original shipment was sent from. In most cases, we do not provide return shipping labels for cores, if a return label is provided in the original shipment, use this tag. If one is not included, contact us immediately, and we can provide you with the correct address of where the core(s) must be returned to. DO NOT rely on the return address on the original label as a source for where to ship to • If cores are shipped to the incorrect warehouse, your core money will be returned less the shipping cost for us to send the core(s) to the correct warehouse, or if you deferred the core you may be charged for the shipping amount • Cores that have been disassembled or have missing and/or damaged major components will not receive full core credit • Cores must be returned in the original packaging the new part was shipped in. Most manufacturers design special packaging for their products to protect them while in transit. Failure to reuse this packaging can result in damage to the core(s) which could lead to the forfeiture of your core return. Specifically regarding Bosch, they have a strict policy that core returns must be in their original packaging. If the original packaging is not used, the part number must be clearly identifiable on the part itself. If neither of these core criteria are met, no core return will be available. • Returned cores must match the same vehicle fitment as the new part purchased. For instance, if you purchase a replacement turbo for a 2007.5-2012 Dodge Ram 6.7L Cummins, the returned core must have a fitment of that same application. • We have the right to alter this policy (i.e. extend the terms) for any reason. If you have an outstanding circumstance, contact us General/New Returns • All products must be in new/uninstalled/UNOPENED condition with all the parts included • All products must be sent back in NEW and original packaging • Returns will not be accepted after 30-day from date received • Customer is 100% responsible for shipping costs (Ex: If you return an item and did not originally pay shipping costs, the original shipping cost incurred by us will be deducted from your refund) • Credit will be issued after the product is inspected and found to be in new condition • ALL returns are subject to a 5% restocking fee. Additional fees may be incurred on non-stocking items which is determined by the manufacturer • Refusal of a shipment will result in an automatic restocking fee determined upon the cost of fees associated with the refusal General/New Returns will NOT be accepted under the following conditions: • Product has been installed or attempt of install • Product has been damaged • Product is shipped without the original packaging, manuals and/or parts • Product Packaging has been opened and or seal has been broke on the product • Custom tuners & tune packs such as, EFI Live, EZ LYNK, HP-Tuners, Hydra tuner are not available for return Product Warranties • Moore’s Diesel Performance honors all manufacturer warranties • Any product that carries a manufacturer's warranty must be warrantied through its respective manufacturer • Installed components which have failed, such as, turbo, injectors, injection pumps, etc., must be removed/shipped back to its manufacturer for inspection before replacement • Moore’s Diesel Performance is not responsible for shipping products to manufacturers for inspection or the return shipping to the end user • Labor time is not paid by Moore’s Diesel Performance • Manufacturers will only pay labor if stated in the manufacturer’s warranty • All products manufactured by Moore’s Diesel Performance carry a one year manufacturer defect warranty
  All core, general and warranty returns must be approved prior to the shipment of the returning product. Please provide your order #. This will help us to process your return quickly.<br>You will receive ALL return instructions via email within 1 - 2 business days.<br>Core Returns: What is a Core?<br>We want to ensure that you are refunded your core charge as soon as possible, but in order to do this, we need your help to follow these guidelines.<br>• We require that all cores be returned within 21 days from delivery date of product requiring core charge. Failure to do so can result in forfeiture of the entire core charge return<br>• All cores must be returned to original warehouse that original shipment was sent from. In most cases, we do not provide return shipping labels for cores, if a return label is provided in the original shipment, use this tag. If one is not included, contact us immediately, and we can provide you with the correct address of where the core(s) must be returned to. DO NOT rely on the return address on the original label as a source for where to ship to<br>• If cores are shipped to the incorrect warehouse, your core money will be returned less the shipping cost for us to send the core(s) to the correct warehouse, or if you deferred the core you may be charged for the shipping amount<br>• Cores that have been disassembled or have missing and/or damaged major components will not receive full core credit<br>• Cores must be returned in the original packaging the new part was shipped in. Most manufacturers design special packaging for their products to protect them while in transit. Failure to reuse this packaging can result in damage to the core(s) which could lead to the forfeiture of your core return. Specifically regarding Bosch, they have a strict policy that core returns must be in their original packaging. If the original packaging is not used, the part number must be clearly identifiable on the part itself. If neither of these core criteria are met, no core return will be available.<br>• Returned cores must match the same vehicle fitment as the new part purchased. For instance, if you purchase a replacement turbo for a 2007.5-2012 Dodge Ram 6.7L Cummins, the returned core must have a fitment of that same application.<br>• We have the right to alter this policy (i.e. extend the terms) for any reason. If you have an outstanding circumstance, contact us<br>General/New Returns<br>• All products must be in new/uninstalled/UNOPENED condition with all the parts included<br>• All products must be sent back in NEW and original packaging<br>• Returns will not be accepted after 30-day from date received<br>• Customer is 100% responsible for shipping costs (Ex: If you return an item and did not originally pay shipping costs, the original shipping cost incurred by us will be deducted from your refund)<br>• Credit will be issued after the product is inspected and found to be in new condition<br>• ALL returns are subject to a 5% restocking fee. Additional fees may be incurred on non-stocking items which is determined by the manufacturer<br>• Refusal of a shipment will result in an automatic restocking fee determined upon the cost of fees associated with the refusal<br>General/New Returns will NOT be accepted under the following conditions:<br>• Product has been installed or attempt of install<br>• Product has been damaged<br>• Product is shipped without the original packaging, manuals and/or parts<br>• Product Packaging has been opened and or seal has been broke on the product<br>• Custom tuners &amp; tune packs such as, EFI Live, EZ LYNK, HP-Tuners, Hydra tuner are not available for return<br>Product Warranties<br>• Moore’s Diesel Performance honors all manufacturer warranties<br>• Any product that carries a manufacturer's warranty must be warrantied through its respective manufacturer<br>• Installed components which have failed, such as, turbo, injectors, injection pumps, etc., must be removed/shipped back to its manufacturer for inspection before replacement<br>• Moore’s Diesel Performance is not responsible for shipping products to manufacturers for inspection or the return shipping to the end user<br>• Labor time is not paid by Moore’s Diesel Performance<br>• Manufacturers will only pay labor if stated in the manufacturer’s warranty<br>• All products manufactured by Moore’s Diesel Performance carry a one year manufacturer defect warranty<br>