68RFE 300M One Piece FORGED Billet Overdrive Clutch Hub and Shaft Assembly *Patent Pending*

We are proud to present the strongest and only true billet forged overdrive clutch hub for the 68RFE. Our shaft fits ALL 68RFE’s both stock and aftermarket from 2008-2019! Unlike the competition who start with an OEM shaft, cryogenically treat, shot peen and tap it with a magic wand; our shaft is truly stronger. Not just in words but in real life physics and testing! The stock hub and shaft is made of 4130 steel. Our hot forged billet shaft is made of 4340M/300M steel. There is no comparison ins strength between the two metals. Please read the chart below to see for yourself. Our base material is nearly 100% stronger than that of the OEM base shaft. No hocus pocus cryogenic heat treat and shot peening process will get you anywhere near what our material difference does. Material Tensile Strength Yield Strength 4130 Steel 97,200 PSI 63,100 PSI 4340/300M Steel 280,000 PSI 230,000 PSI Strength Difference in % 96.92% 113.88% We don’t just use statistics to prove our products we also use real world testing! We sent the OEM hub, a competitor’s OEM cryo/shot peened hub and our 300M forged hub to an independent third party government approved test facility. At the facility the parts were subjected to a torsional yield test that twists the shafts to their breaking point. The results prove just how much stronger our part is vs the OE and competition. Please see the data below: Shaft Torque Before Breaking Strength increase vs OEM OEM Competitor’s OEM cryogenically treated and shot peened Revmax 300M Forged The benefits of the RevMax 300M Billet Overdrive Clutch Hub are far more than just material strength. Our shaft is a 1 piece design. The OE and competition shafts are two piece designs that require a friction weld to join the hub the and shaft. This weld is another fracture and failure point we don’t have. Our shaft also allows the builder to build his OD clutch pack setup to his own specs and liking. When using our shaft along with our RevMax 9x or RevMax 12xR drum assembly with billet forged pressure plates, you now have multiple options for clutch stackup. Using our drum, pressure plates and billet OD hub, these are just a few of the options you now have: Friction Setup OD/Reverse Pressure Plate % Increase over OEM clutch surface area 16 Single Sided Full Thickness, .365” Thick 28.5% 18 Single Sided .265” thick machined pressure plate 40% 20 Single Sided .265” thick machined pressure plate 50% 6 Double Sided w\ 5 .067” Steels Full Thickness, .365” Thick 0% 7 Double Sided w\ 6 .067” Steels .265” thick machined pressure plate 28.5% 8 Double Sided w\ 7 .067” Steels .180” thick machined pressure plate 40% Our shaft features the following benefits vs the competition and OEM stock shaft: Ability to run full thickness pressure plates while increasing clutch capacity by 28% Up to 50% more clutch capacity when using the industry standard .100” machined OD/Rev pressure plate. Longer clutch hub length allowing the installation of up to 20 single sided or 8 double sided frictions. One piece design that eliminates the weld from failing 4340M/300M billet hot forged material that is nearly 100% stronger than the OEM shaft Precision ground bushing surfaces Shot Peened lubrication holes to stop any stress cracks from forming Can be installed in a 100% OEM stock transmission without ANY modifications or into a transmission that incorporates any current aftermarket drum assembly.

• Shipping: 
• Return Policy: All core, general and warranty returns must be approved prior to the shipment of the returning product. Please provide your order #. This will help us to process your return quickly. You will receive ALL return instructions via email within 1 - 2 business days. Core Returns: What is a Core? We want to ensure that you are refunded your core charge as soon as possible, but in order to do this, we need your help to follow these guidelines. • We require that all cores be returned within 21 days from delivery date of product requiring core charge. Failure to do so can result in forfeiture of the entire core charge return • All cores must be returned to original warehouse that original shipment was sent from. In most cases, we do not provide return shipping labels for cores, if a return label is provided in the original shipment, use this tag. If one is not included, contact us immediately, and we can provide you with the correct address of where the core(s) must be returned to. DO NOT rely on the return address on the original label as a source for where to ship to • If cores are shipped to the incorrect warehouse, your core money will be returned less the shipping cost for us to send the core(s) to the correct warehouse, or if you deferred the core you may be charged for the shipping amount • Cores that have been disassembled or have missing and/or damaged major components will not receive full core credit • Cores must be returned in the original packaging the new part was shipped in. Most manufacturers design special packaging for their products to protect them while in transit. Failure to reuse this packaging can result in damage to the core(s) which could lead to the forfeiture of your core return. Specifically regarding Bosch, they have a strict policy that core returns must be in their original packaging. If the original packaging is not used, the part number must be clearly identifiable on the part itself. If neither of these core criteria are met, no core return will be available. • Returned cores must match the same vehicle fitment as the new part purchased. For instance, if you purchase a replacement turbo for a 2007.5-2012 Dodge Ram 6.7L Cummins, the returned core must have a fitment of that same application. • We have the right to alter this policy (i.e. extend the terms) for any reason. If you have an outstanding circumstance, contact us General/New Returns • All products must be in new/uninstalled/UNOPENED condition with all the parts included • All products must be sent back in NEW and original packaging • Returns will not be accepted after 30-day from date received • Customer is 100% responsible for shipping costs (Ex: If you return an item and did not originally pay shipping costs, the original shipping cost incurred by us will be deducted from your refund) • Credit will be issued after the product is inspected and found to be in new condition • ALL returns are subject to a 5% restocking fee. Additional fees may be incurred on non-stocking items which is determined by the manufacturer • Refusal of a shipment will result in an automatic restocking fee determined upon the cost of fees associated with the refusal General/New Returns will NOT be accepted under the following conditions: • Product has been installed or attempt of install • Product has been damaged • Product is shipped without the original packaging, manuals and/or parts • Product Packaging has been opened and or seal has been broke on the product • Custom tuners & tune packs such as, EFI Live, EZ LYNK, HP-Tuners, Hydra tuner are not available for return Product Warranties • Moore’s Diesel Performance honors all manufacturer warranties • Any product that carries a manufacturer's warranty must be warrantied through its respective manufacturer • Installed components which have failed, such as, turbo, injectors, injection pumps, etc., must be removed/shipped back to its manufacturer for inspection before replacement • Moore’s Diesel Performance is not responsible for shipping products to manufacturers for inspection or the return shipping to the end user • Labor time is not paid by Moore’s Diesel Performance • Manufacturers will only pay labor if stated in the manufacturer’s warranty • All products manufactured by Moore’s Diesel Performance carry a one year manufacturer defect warranty
  All core, general and warranty returns must be approved prior to the shipment of the returning product. Please provide your order #. This will help us to process your return quickly.<br>You will receive ALL return instructions via email within 1 - 2 business days.<br>Core Returns: What is a Core?<br>We want to ensure that you are refunded your core charge as soon as possible, but in order to do this, we need your help to follow these guidelines.<br>• We require that all cores be returned within 21 days from delivery date of product requiring core charge. Failure to do so can result in forfeiture of the entire core charge return<br>• All cores must be returned to original warehouse that original shipment was sent from. In most cases, we do not provide return shipping labels for cores, if a return label is provided in the original shipment, use this tag. If one is not included, contact us immediately, and we can provide you with the correct address of where the core(s) must be returned to. DO NOT rely on the return address on the original label as a source for where to ship to<br>• If cores are shipped to the incorrect warehouse, your core money will be returned less the shipping cost for us to send the core(s) to the correct warehouse, or if you deferred the core you may be charged for the shipping amount<br>• Cores that have been disassembled or have missing and/or damaged major components will not receive full core credit<br>• Cores must be returned in the original packaging the new part was shipped in. Most manufacturers design special packaging for their products to protect them while in transit. Failure to reuse this packaging can result in damage to the core(s) which could lead to the forfeiture of your core return. Specifically regarding Bosch, they have a strict policy that core returns must be in their original packaging. If the original packaging is not used, the part number must be clearly identifiable on the part itself. If neither of these core criteria are met, no core return will be available.<br>• Returned cores must match the same vehicle fitment as the new part purchased. For instance, if you purchase a replacement turbo for a 2007.5-2012 Dodge Ram 6.7L Cummins, the returned core must have a fitment of that same application.<br>• We have the right to alter this policy (i.e. extend the terms) for any reason. If you have an outstanding circumstance, contact us<br>General/New Returns<br>• All products must be in new/uninstalled/UNOPENED condition with all the parts included<br>• All products must be sent back in NEW and original packaging<br>• Returns will not be accepted after 30-day from date received<br>• Customer is 100% responsible for shipping costs (Ex: If you return an item and did not originally pay shipping costs, the original shipping cost incurred by us will be deducted from your refund)<br>• Credit will be issued after the product is inspected and found to be in new condition<br>• ALL returns are subject to a 5% restocking fee. Additional fees may be incurred on non-stocking items which is determined by the manufacturer<br>• Refusal of a shipment will result in an automatic restocking fee determined upon the cost of fees associated with the refusal<br>General/New Returns will NOT be accepted under the following conditions:<br>• Product has been installed or attempt of install<br>• Product has been damaged<br>• Product is shipped without the original packaging, manuals and/or parts<br>• Product Packaging has been opened and or seal has been broke on the product<br>• Custom tuners &amp; tune packs such as, EFI Live, EZ LYNK, HP-Tuners, Hydra tuner are not available for return<br>Product Warranties<br>• Moore’s Diesel Performance honors all manufacturer warranties<br>• Any product that carries a manufacturer's warranty must be warrantied through its respective manufacturer<br>• Installed components which have failed, such as, turbo, injectors, injection pumps, etc., must be removed/shipped back to its manufacturer for inspection before replacement<br>• Moore’s Diesel Performance is not responsible for shipping products to manufacturers for inspection or the return shipping to the end user<br>• Labor time is not paid by Moore’s Diesel Performance<br>• Manufacturers will only pay labor if stated in the manufacturer’s warranty<br>• All products manufactured by Moore’s Diesel Performance carry a one year manufacturer defect warranty<br>